PTC Creo Expert Moldbase Extension 11.0.0.0
- کاربرد : پلاگین طراحی قالب در Creo Parametric
- نسخه :Version 11.0.0.0
- نوع فایل : نرم افزار
- زبان : انگلیسی
- سیستم عامل : Windows 32 & 64 Bit
- تولید کننده : PTC
- سال تولید : 2018
توضیحات
محیطی کامل و پیشرفته را در اختیار کاربران قرار می دهد تا بتوانند انواع فرایند های قالب سازی را با بالاترین کیفیت و دقت پیاده سازی کنند. شما می توانید در این پلاگین مدل های دو بعدی خود را طراحی کنید و در عین حال از تمامی مزایای مدل سازی سه بعدی بهره ببرید. این پلاگین دارای ابزار ها و اجزای استاندارد و پیشرفته ای است و بعلاوه قادر است مدل را در طی مراحل توسعه به صورت خودکار آپدیت کند. این پلاگین در پایان مراحل طراحی مدل را به صورت سه بعدی همراه با تمامی جزئیات به کاربر ارائه می دهد. با بهره گیری از این پلاگین می توانید تمامی جزئیات و اجزای قالب را با رعایت تمامی استاندارد ها طراحی نمایید.
قابلیت های کلیدی نرم افزار Expert Moldbase Extension:
- رابط کاربری گرافیکی 2D و تخصصی
- مونتاژ اتوماتیک قطعات
- ایجاد، ذخیره و استفاده مجدد قطعات
- امکان طراحی قطعات استاندارد و غیر استاندارد
- رسم اتوماتیک نمودار ها و مستندات
- طراحی تمامی جزئیات قالب
- و ...
قابلیت های کلیدی نرم افزار Expert Moldbase Extension:
- رابط کاربری گرافیکی 2D و تخصصی
- مونتاژ اتوماتیک قطعات
- ایجاد، ذخیره و استفاده مجدد قطعات
- امکان طراحی قطعات استاندارد و غیر استاندارد
- رسم اتوماتیک نمودار ها و مستندات
- طراحی تمامی جزئیات قالب
- و ...
Description
Creo Tool Design Extension creates the most complex single-cavity and multi-cavity molds and casts with ease. Evaluate mold draft, undercut and thickness problems, and then automatically create parting surface and splitting geometry in a process-driven environment that’s simple–even for the occasional user–who needs to create complex tooling quickly.
Expert Moldbase Extension gives you a familiar 2D environment for moldbase layout–and get all the benefits of 3D! The 2D process-driven GUI offers a catalog of standard and custom components, and updates your model automatically during the development of the moldbase, by providing a catalog of standard and customized components. Your resulting 3D models are then used for interference checking during mold opening, as well as automatic generation of deliverables such as detail drawings and BOMs.
Here are some key features of "Expert Moldbase Extension":
- Specialised 2D GUI for instant customisation of moldbases and components
- Automatic assembly of components – ‘pick & place’ ease
- All necessary clearance holes, threads, counterbores, etc. are automatically added to plates
- Part-level features already fully dimensioned
- Custom components can be created, saved and reused
- Automatic layers and simplified representations for easy viewing
- Standard and nonstandard mold components are marked
- Ability to take your customer parts through the complete process
- Supplier catalogs include: DME, DMS, EOC, FUTABA (Misumi), HASCO, KLA, MEUSBURGER, PEDROTTI, RABOURDIN, STRACK, PROGRESSIVE, NATIONAL, PCS and others
- Automatic functions for: Complete Moldbase Assemblies; Plates and Insulation; Guide, Leader and Return Pin Assemblies; Multi-Cavity and Family Molds Supported; Support Pillar Assemblies; Latch Lock Assemblies; Locating Rings and Sprue Bushing; Ejector Pins, including Sleeve Ejection; Screws and Washers; Dowel Pins; Cooling Circuit with Fittings, Plugs and O-Rings; Slider and Lifter Assemblies
- Automatic Drawing, Hole Chart and BOM Creation
- Mold Opening and Ejection Simulation
- Capturing Company Specific Best Practices and Standards in catalogues
Expert Moldbase Extension gives you a familiar 2D environment for moldbase layout–and get all the benefits of 3D! The 2D process-driven GUI offers a catalog of standard and custom components, and updates your model automatically during the development of the moldbase, by providing a catalog of standard and customized components. Your resulting 3D models are then used for interference checking during mold opening, as well as automatic generation of deliverables such as detail drawings and BOMs.
Here are some key features of "Expert Moldbase Extension":
- Specialised 2D GUI for instant customisation of moldbases and components
- Automatic assembly of components – ‘pick & place’ ease
- All necessary clearance holes, threads, counterbores, etc. are automatically added to plates
- Part-level features already fully dimensioned
- Custom components can be created, saved and reused
- Automatic layers and simplified representations for easy viewing
- Standard and nonstandard mold components are marked
- Ability to take your customer parts through the complete process
- Supplier catalogs include: DME, DMS, EOC, FUTABA (Misumi), HASCO, KLA, MEUSBURGER, PEDROTTI, RABOURDIN, STRACK, PROGRESSIVE, NATIONAL, PCS and others
- Automatic functions for: Complete Moldbase Assemblies; Plates and Insulation; Guide, Leader and Return Pin Assemblies; Multi-Cavity and Family Molds Supported; Support Pillar Assemblies; Latch Lock Assemblies; Locating Rings and Sprue Bushing; Ejector Pins, including Sleeve Ejection; Screws and Washers; Dowel Pins; Cooling Circuit with Fittings, Plugs and O-Rings; Slider and Lifter Assemblies
- Automatic Drawing, Hole Chart and BOM Creation
- Mold Opening and Ejection Simulation
- Capturing Company Specific Best Practices and Standards in catalogues
برای اطلاع از طریقه نصب به فایل How to Install.txt رجوع شود.
