Siemens LMS Virtual.Lab Rev 13.8
- کاربرد : قدرتمندترین نرم افزار شبیهسازی مهندسی و سیستمهای مکانیکی
- نسخه :Version 13.8
- نوع فایل : نرم افزار
- زبان : انگلیسی
- سیستم عامل : Windows 32 & 64 Bit
- تولید کننده : Siemens
- سال تولید : 2018
توضیحات
یکی از محصولات پرطرفدار شرکت Siemens بوده که به طور تخصصی برای امور شبیه سازی، آنالیز، تست سیستمهای مکانیکی ارائه شده است. این نرم افزار دارای قسمتهای مختلفی بوده که هر کدام کاربردهای به خصوصی دارند؛ یکپارچگی سازهها، آنالیز نویز و ارتعاشات و دینامیک سیستمها از جمله این طبقه بندیها هستند. شبیه سازی پیشرفته سیستمهای مکاترونیک و کاربرد وسیع آن در صنایع خودرو، هوا فضا، الکترونیک، مکانیک، کامپیوتر از دیگر قابلیتهای بینظیر این برنامه است.
این نرم افزار به عنوان «آزمایشگاه مجای زیمنس» نیز یاد میشود، آزمایشگاهی بسیار مجهز جهت انجام انواع تستهای مهندسی که قابلیتهای بیشماری دارد. این نرم افزار بر پایه حل عددی معادلات به روش المان محدود بنا شده است و امکانات مشترکی با FEMAP و NXNastran دارد.
یکی از کاربردهای گستره این نرم افزار در شبیه سازی آکوستیک و ارتعاشی است که به مهندسان کمک میکند چگونه بتوانند محیطهای ایزوله به دور از هرگونه صدای ناخواسته و مزاحم طراحی کنند، این قابلیت بیشتر برای طراحی محیطهای صنعتی کاربرد دارد که در آن دستگاههایی مشغول به کارند که نویز و یا ارتعاشات زیادی تولید میکنند.
آنالیز جریانهای انرژی و شبیه سازی در سیستمهای متحرک (معمولاً با سرعت بالا) مانند خودرو، جت، هواپیما و غیره از دیگر قابلیتهای این نرم افزار بوده که به مهندسین کمک میکند تا بتوانند سیستمهای خود را تا حد ممکن بهینه کرده و نقاط ضعف آنها را شناسایی کنند.
یکی از کاربردهای دیگر این نرم افزار در مهندسی مواد است؛ با کمک این نرم افزار میتوان با استفاده از شبیه سازیهای دقیق، عمر قطعات مختلف را محاسبه نمود و از انواع شکستهای خستگی و خرشی به موقع جلوگیری کرد؛ این امر سبب میشود تا بتوان در سیستمهای حساس نظیر هواپیما طول سرویس دهی آنها را محاسبه کرد تا باعث بروز خسارات زیاد باری نشود.
قابلیتهای کلیدی نرم افزار LMS Virtual.Lab:
- شبیه سازی پیشرفته انواع سیستمهای مکانیکی، دینامیکی و مکاترونیک
- شبیه سازی سه بعدی و حل عددی معادلات به روش المان محدود
- بهینه سازی سیستمهای طراحی شده قبل از Prototype
- محاسبه عمر خستگی و خزشی سیستمهای حساس
- مدلسازی بر پایه FEA
- کاهش هزینه و افزایش راندمان تولید
- سازگاری بالا با نرم افزارهای مهندسی نظیر NXNastran و FEMAP
- سازگاری بالا با نرم افزار های طراحی مانند CATIA
لیست نرم افزارهای موجود در این بسته:
این مجموعه به طور کلی در قالب 3 یسته مجزا ارائه شده است.
1. LMS Virtual.Lab 13.8
2. LMS Virtual.Lab 13.8 APPSnDOCS
3. LMS Complementary Solvers & NXNastran 13.8
- بسته شماره 1 شامل نرم افزار اصلی بوده و الزاماً باید در ابتدا نصب شود.
- بسته شماره 2 شامل نرم افزارهای جانبی و ابزارهای تکمیلی بوده که نرم افزارهای موجود در آن به شرح زیر است:
- LMS Virtual.Lab On-Line Help
- LMS Virtual.Lab Powertrain Dynamic Simulator
- LMS Virtual.Lab Composer
- LMS Virtual.Lab Transmission Builder
- LMS Virtual.Lab Driving Dynamics
- LMS Virtual.Lab Motion-TWR
- LMS Virtual.Lab Flex Wizard
- LMS Virtual.Lab MRR COM for Excel / MRR API / MRR Command-line
- LMS Virtual.Lab Motion Advanced Features Editor
- LMS Virtual.Lab Eloads
- LMS Virtual.Lab Leaf Spring
- بسته شماره 3 شامل Solver های اضافی و تکمیلی بوده که شامل دو برنامه LMS Complementary Solvers و Siemens NXNastran for LMS میشود؛ Solver های تکمیلی LMS برای ماژولهای Acoustic و Durability هستند و بر روی نرم افزار اصلی نصب میشود و Siemens NXNastran در واقع یک نسخه بهینه شده NXNastran بوده که برای LMS طراحی و ارائه گردیده است.
این نرم افزار به عنوان «آزمایشگاه مجای زیمنس» نیز یاد میشود، آزمایشگاهی بسیار مجهز جهت انجام انواع تستهای مهندسی که قابلیتهای بیشماری دارد. این نرم افزار بر پایه حل عددی معادلات به روش المان محدود بنا شده است و امکانات مشترکی با FEMAP و NXNastran دارد.
یکی از کاربردهای گستره این نرم افزار در شبیه سازی آکوستیک و ارتعاشی است که به مهندسان کمک میکند چگونه بتوانند محیطهای ایزوله به دور از هرگونه صدای ناخواسته و مزاحم طراحی کنند، این قابلیت بیشتر برای طراحی محیطهای صنعتی کاربرد دارد که در آن دستگاههایی مشغول به کارند که نویز و یا ارتعاشات زیادی تولید میکنند.
آنالیز جریانهای انرژی و شبیه سازی در سیستمهای متحرک (معمولاً با سرعت بالا) مانند خودرو، جت، هواپیما و غیره از دیگر قابلیتهای این نرم افزار بوده که به مهندسین کمک میکند تا بتوانند سیستمهای خود را تا حد ممکن بهینه کرده و نقاط ضعف آنها را شناسایی کنند.
یکی از کاربردهای دیگر این نرم افزار در مهندسی مواد است؛ با کمک این نرم افزار میتوان با استفاده از شبیه سازیهای دقیق، عمر قطعات مختلف را محاسبه نمود و از انواع شکستهای خستگی و خرشی به موقع جلوگیری کرد؛ این امر سبب میشود تا بتوان در سیستمهای حساس نظیر هواپیما طول سرویس دهی آنها را محاسبه کرد تا باعث بروز خسارات زیاد باری نشود.
قابلیتهای کلیدی نرم افزار LMS Virtual.Lab:
- شبیه سازی پیشرفته انواع سیستمهای مکانیکی، دینامیکی و مکاترونیک
- شبیه سازی سه بعدی و حل عددی معادلات به روش المان محدود
- بهینه سازی سیستمهای طراحی شده قبل از Prototype
- محاسبه عمر خستگی و خزشی سیستمهای حساس
- مدلسازی بر پایه FEA
- کاهش هزینه و افزایش راندمان تولید
- سازگاری بالا با نرم افزارهای مهندسی نظیر NXNastran و FEMAP
- سازگاری بالا با نرم افزار های طراحی مانند CATIA
لیست نرم افزارهای موجود در این بسته:
این مجموعه به طور کلی در قالب 3 یسته مجزا ارائه شده است.
1. LMS Virtual.Lab 13.8
2. LMS Virtual.Lab 13.8 APPSnDOCS
3. LMS Complementary Solvers & NXNastran 13.8
- بسته شماره 1 شامل نرم افزار اصلی بوده و الزاماً باید در ابتدا نصب شود.
- بسته شماره 2 شامل نرم افزارهای جانبی و ابزارهای تکمیلی بوده که نرم افزارهای موجود در آن به شرح زیر است:
- LMS Virtual.Lab On-Line Help
- LMS Virtual.Lab Powertrain Dynamic Simulator
- LMS Virtual.Lab Composer
- LMS Virtual.Lab Transmission Builder
- LMS Virtual.Lab Driving Dynamics
- LMS Virtual.Lab Motion-TWR
- LMS Virtual.Lab Flex Wizard
- LMS Virtual.Lab MRR COM for Excel / MRR API / MRR Command-line
- LMS Virtual.Lab Motion Advanced Features Editor
- LMS Virtual.Lab Eloads
- LMS Virtual.Lab Leaf Spring
- بسته شماره 3 شامل Solver های اضافی و تکمیلی بوده که شامل دو برنامه LMS Complementary Solvers و Siemens NXNastran for LMS میشود؛ Solver های تکمیلی LMS برای ماژولهای Acoustic و Durability هستند و بر روی نرم افزار اصلی نصب میشود و Siemens NXNastran در واقع یک نسخه بهینه شده NXNastran بوده که برای LMS طراحی و ارائه گردیده است.
Description
LMS Virtual.Lab is an integrated suite of 3D FE and multibody simulation software which simulates and optimizes the performance of mechanical systems for structural integrity, noise and vibration, system dynamics and durability. Using the LMS Virtual.Lab suite, engineering teams can:
- Build accurate simulation models
- Simulate mechanical design behavior
- Quickly assess multiple design alternatives
- Optimize designs before prototype construction
- Accurately detect weak spots
- Efficiently explore multiple design alternatives
Finite Element Acoustics
LMS Virtual.Lab Finite Element Acoustics offers a method for acoustic simulation, helping you predict and improve sound and noise performances of systems. Finite Element Acoustics can create a weak and fully coupled vibro-acoustic simulation to determine how acoustic sources affect the structure.
NVH Response Analysis
LMS Virtual.Lab NVH Response Analysis is an easy-to-use, entry-level simulation tool for predicting the noise and vibration behavior of a component, subsystem or complete model under operational loading conditions.
Structural Correlation and Pre-test Analysis
When preparing measurements for physical structures, using modal information of preliminary finite element models to define the optimal measurement setup is called pre-test analysis. After good test data for the physical model is available, structural correlation analysis allows you to quantify the geometrical and dynamic, such as frequency response function (FRF) and modal, resemblance between the test model and its equivalent FE model.
Advanced Optimization
LMS Virtual.Lab Advanced Optimization incorporates additional optimization methods as well as multi-objective optimization and robust design techniques. Global Optimization solves general constrained optimization problems. The Multi-objective Optimization module helps optimize designs with two or more competing objectives. You can study the result variation and build higher quality products by making the design more robust and reliable.
SEA+
SEA+ software, developed by InterAC, simulates mid and high frequency noise and vibration (N&V) performances. SEA+ provides breakthrough technologies in the N&V design process based on the method of statistical energy analysis (SEA).
Multibody Dynamic Motion
LMS Virtual.Lab Motion is an integrated multibody solution to model, simulate and analyze realistic dynamic motion of any mechanical system. The multibody modeling software helps you analyze and optimize the real-world mechanical design behavior in order to guarantee optimal performance before committing to physical prototype testing.
Component Fatigue
LMS Virtual.Lab Component Fatigue is a complete solution to accurately assess the fatigue performance of individual components in one, integrated simulation environment. By combining component loads derived from prototype measurements or multibody simulations, FE-based stress results and cyclic fatigue material parameters, you can predict fatigue hotspots and fatigue life as well as optimize the component design.
FEA Pre/Post
LMS Virtual.Lab FEA Pre/Post is the standard configuration for simulation engineers performing linear, nonlinear and crash finite element analysis using industry standard solvers. The preprocessing and postprocessing configuration lets you import models or meshes from industry standard solver formats, check and fix quality aspects, perform additional mesh modeling, set up load and boundary conditions, drive the preferred solver and postprocessing results.
Meshing
LMS Virtual.Lab Meshing is a complete configuration for geometry healing, meshing and performing linear, nonlinear and crash finite element analysis (FEA) using industry standard solvers. The meshing engine combines a basic and advanced mesher for automatic and associative generation of a finite element model on wireframe, surface or solid geometries.
More info (open/close)
- Build accurate simulation models
- Simulate mechanical design behavior
- Quickly assess multiple design alternatives
- Optimize designs before prototype construction
- Accurately detect weak spots
- Efficiently explore multiple design alternatives
Finite Element Acoustics
LMS Virtual.Lab Finite Element Acoustics offers a method for acoustic simulation, helping you predict and improve sound and noise performances of systems. Finite Element Acoustics can create a weak and fully coupled vibro-acoustic simulation to determine how acoustic sources affect the structure.
NVH Response Analysis
LMS Virtual.Lab NVH Response Analysis is an easy-to-use, entry-level simulation tool for predicting the noise and vibration behavior of a component, subsystem or complete model under operational loading conditions.
Structural Correlation and Pre-test Analysis
When preparing measurements for physical structures, using modal information of preliminary finite element models to define the optimal measurement setup is called pre-test analysis. After good test data for the physical model is available, structural correlation analysis allows you to quantify the geometrical and dynamic, such as frequency response function (FRF) and modal, resemblance between the test model and its equivalent FE model.
Advanced Optimization
LMS Virtual.Lab Advanced Optimization incorporates additional optimization methods as well as multi-objective optimization and robust design techniques. Global Optimization solves general constrained optimization problems. The Multi-objective Optimization module helps optimize designs with two or more competing objectives. You can study the result variation and build higher quality products by making the design more robust and reliable.
SEA+
SEA+ software, developed by InterAC, simulates mid and high frequency noise and vibration (N&V) performances. SEA+ provides breakthrough technologies in the N&V design process based on the method of statistical energy analysis (SEA).
Multibody Dynamic Motion
LMS Virtual.Lab Motion is an integrated multibody solution to model, simulate and analyze realistic dynamic motion of any mechanical system. The multibody modeling software helps you analyze and optimize the real-world mechanical design behavior in order to guarantee optimal performance before committing to physical prototype testing.
Component Fatigue
LMS Virtual.Lab Component Fatigue is a complete solution to accurately assess the fatigue performance of individual components in one, integrated simulation environment. By combining component loads derived from prototype measurements or multibody simulations, FE-based stress results and cyclic fatigue material parameters, you can predict fatigue hotspots and fatigue life as well as optimize the component design.
FEA Pre/Post
LMS Virtual.Lab FEA Pre/Post is the standard configuration for simulation engineers performing linear, nonlinear and crash finite element analysis using industry standard solvers. The preprocessing and postprocessing configuration lets you import models or meshes from industry standard solver formats, check and fix quality aspects, perform additional mesh modeling, set up load and boundary conditions, drive the preferred solver and postprocessing results.
Meshing
LMS Virtual.Lab Meshing is a complete configuration for geometry healing, meshing and performing linear, nonlinear and crash finite element analysis (FEA) using industry standard solvers. The meshing engine combines a basic and advanced mesher for automatic and associative generation of a finite element model on wireframe, surface or solid geometries.
More info (open/close)
برای اطلاع از طریقه نصب به فایل How to Install.txt رجوع شود.